Let's understand the correct operation process of the brush tufting machine
Accurate process operation: the reasonable use of flocking (fluff) pulp plays a crucial role in the flocking process. First, a certain amount of additives (1.5%-2%) or additives are added when the flocking (fluff) pulp is used. Mix and stir with 1:1 water, and then add it into the slurry and stir evenly. The prepared slurry must be used immediately and cannot be left for too long (within 8 hours), otherwise cross-linking will occur at abnormal temperature and affect the use.
This is a matter of attention during operation. If the flocking pulp is too thick during printing, you can add appropriate amount of water to dilute it, which is helpful for benign operation. It is recommended to use 800 mesh (80 mesh) plate making and screen printing: pay attention to the time between the last printing of flocking (fleece) pulp and the flocking operation, and there must be no gap of 1 minute. The number of printings depends on the relevant fabric, time, etc. factor adjustment.
The cloth is naturally dry and can be washed with normal water at 60°C after 24 hours. If the customer requires strict quality, it must be baked at 160 ° C for 10-60 seconds. Of course, the baking temperature and time also need to be adjusted according to the relevant fabric and requirements. The final process of fabric flocking is to clear the tail process. After using the wool suction machine to absorb the hair, the finished wool product is shipped by sticking the residual part of the fabric with adhesive tape.
