What is the operation process of the brush tufting machine?
In our daily life, the process of hair planting has become very common. What is the operation process of the brush tufting machine?
1. The voltage regulator outputs 200V alternating current to supply power to the 100kV transformer. One end of the transformer is grounded, and the other end is connected to the screen inside the wooden box.
2. Put the bucket containing the mixed slurry into the mixing bucket, tighten the bucket cover, connect the air source and the shotgun, then turn on the air source, and evenly mix the slurry with the electric fan blades in the mixing bucket.
3. Put the rubber parts that need hair planting into the plastic mold, then put them into the air extraction box, open the spray box, spray a lot of glue on the rubber parts, and then take the rubber parts out of the plastic mold, Then put it on top of the hanging stick.
4. Put the wooden stick into the hair planting box, step on the switch and turn on the power, so that the screen absorbs the fluff under static high pressure. Then put down the part that needs to be planted, and constantly swing against the fluff, so that the fluff reaches an average level within a period of time and fully absorbs the rubber sheet.
5. Put the glue laid with wooden sticks into the oven to dry.
6. Take the wooden stick out of the stove, then take out the film from the wooden stick and put it away. When the film cools down to room temperature, start cleaning the flocked surface.
