How to maintain brush making equipment
Brush-making equipment is a necessary equipment in brush-making factories. Brush-making equipment is used in daily work. It can be said that it is a necessary equipment for production. Because of the high utilization rate, the maintenance of brush-making equipment is very important. Today, the CNC editor will introduce to you the maintenance work of brush making equipment.
Brush making equipment maintenance work:
(1) The operator should often add lubricating oil to the moving parts of the hair planting machine to reduce mechanical wear.
(2) Regularly check whether the screws are loose, and lock them in time.
(3) Keep the guide rail and screw rod clean to avoid debris adhering to the guide rail or screw rod, which will affect the accuracy of work positioning.
(4) Ensure that the electric box works in a ventilated environment, avoid humid or high temperature environments, and prevent the electric box from vibrating violently.
(5) The electric box cannot work in the environment of strong electromagnetic field, otherwise uncontrolled situation may occur.
(6) The wiring of the input power supply should be correct (the red, blue, and yellow wires are connected to the 380V three-phase wire respectively, the green wire is connected to the neutral wire, and the yellow-green phase-to-phase wire is connected to the ground wire). 4 neutral, 5 ground. The working voltage should be stable and kept at AC380±10V. Excessive voltage may cause the electronic components to burn out.
