What is the operating procedure of the brush tufting machine?
The voltage stabilizer outputs 200 volts AC to provide a 100 kV transformer, one end of the transformer is grounded, and the other end is connected to the screen inside the wooden box. Put the bucket containing the glue that has been mixed into the mixing bucket, then tighten the lid of the bucket, then connect the air source and the spray gun, then turn on the air source, and first make the electric fan in the mixing bucket to stir the glue. average. Put the glue parts that need to be processed into the glue mold, then put them into the air extraction box, open the spray box, spray a lot of glue on the glue parts, and then take the glue parts from the glue mold. Come out and put it on the pendant stick.
Put the wooden stick into the hair planting box, step on the switch, connect the power supply, and make the screen absorb the fluff under the high voltage of static electricity. Then put the part that needs to be planted down, and swing against the fluff, so that the fluff can reach the uniform and adequately adsorb the glue for a period of time. Put the glued parts and wooden sticks into the furnace together, dry the glue and take out the wooden sticks from the furnace, then take out the glued parts from the wooden sticks and put them in place. After the glued parts are cooled to room temperature, Start cleaning the flocked surface.
