What is the reason for the problems with the brushes produced by the brush-making equipment factory?
Brushes are products that many manufacturers and families use now, such as toothbrushes at home, common cleaning supplies in factories, etc. So, if there are quality problems with brushes, what are the reasons?
Analysis of the causes of the problems with the brushes produced by the brush-making equipment factory:
1. Low filament density: Some brush manufacturers may reduce the amount of bristles due to cost issues, resulting in too thin brushes, and when the density is not enough, the service life will be too short during use.
2. Inclination of hair planting: This problem is mostly caused by the improper placement of the brush-making setting or the failure of the brush-making equipment itself and no maintenance.
3. The problem of brush shedding and broken hair: if it is a single hair falling, it is normal, and if it is a bunch of falling, it is a production problem of the hair planting machine, and the firmness is not good. If it is a large piece of hair loss, it may be a problem in use, and this area may be used too frequently.
4. The bristles are too long: the bristles that are too long may be the wrong size.
5. Differences in processing technology. Sometimes brush users use their own familiar processes to replace other processes, which will also produce poor quality, such as metal stamping brushes, due to the high density, the hardness of the brush surface is higher, the pressure during use is small, and there is a small amount of space at the root of the brush, which can reduce the The impact force of the root, in the pneumatic machining, the service life will be significantly longer than that of the flocking brush.
If there is such a quality problem, you can contact the brush manufacturer for quality replacement.
