Common faults and troubleshooting methods of hair planting machine
1. The waste hair of bristle brush and wool brush is not clean. ① Increase the rotation speed of the roller and slow down the transmission speed of the chain; ② Try to adjust the brush as close as possible to the direction of the roller, as long as the needle does not touch the filling strip in the brush head without damaging the bristles. 2. The filaments of the wire brush are twisted and deformed, which mainly reduces the speed of the rollers, and at the same time, the speed of the chain transmission can be adjusted faster. 3. The rubber chain in the bottom row is easy to drop the rubber or the chain makes an abnormal sound, sort out the waste hair in the double-row sprocket groove in time, add lubricating oil (evenly, a little), and tighten the chain. 4. The brush head is simply sucked into the machine compartment. ①Adjust and tighten the screw and press the brush head tightly; ②Clean the thickness of the brush head; ③The brush head cannot be in the shape of a waist drum (the center protrudes); ④If it is a drum shape, leave a gap between the brush head and the brush head. There are gaps.
